Waterproofing Wood Protector
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Description
WHERE TO USE
Exterior, properly prepared, unsealed wood surfaces such as: Decks, Railings, Shakes, Shingles, Siding, Roofs, Fences, Planters and Wood Patio Furniture.
Must Prep Before Applying Wood Protector
2 Coats Required: Must Apply 2nd Coat Thinner than the 1st Coat
Spread Rate:1st Coat 300-350 Sq.Ft.; 2nd Coat 600-700 Sq. Ft.
Soap & Water Clean-Up
PREPARATION†
(The following steps and products are recommended for best results.)
- Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood.
- BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood.
- When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium stains caused by mold, mildew, algae & fungus.
- On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood. Rinse thoroughly and allow to dry before coating. Lightly sand any remaining wood fibers/fuzz.
Contact the seller
Waterproofing Wood Protector
We recommend to see